Ekonol® Aromatic Polyester
Features & Benefits:
- Highly crystalline structure, allowing thermal stability
- Good creep resistance & excellent load-bearing capacity
- Round shape which does not wear metal surfaces (especially rotating parts)
- Good lubricity
- Chemical resistance (except to sulfuric acid and strong alkalis)
Saint-Gobain varies particle size distribution & apparent density to deliver two grades of Ekonol polyester PTFE fillers. Our team can work with you to select the proper grade of Ekonol PTFE filler to meet your specific application needs.
Ekonol® T101 Polyester PTFE Filler for Bearing Applications
Ekonol® T101 aromatic polyester filler is a tan powder additive that, when combined with PTFE, produces a composite material with excellent temperature and wear resistance for a wide range of mating surfaces in demanding services. This filler extends the life of bearings and other large moving parts that may contain silica or alumina.
The highly crystalline structure of the Ekonol® T101 polymer was created to deliver maximum dimensional, chemical & thermal stability. In addition, the non-abrasive character of Ekonol® T101 polyester enhances the frictional performance to prevent galling of softer mating surfaces better than other PTFE fillers.
Typical Properties of Ekonol® T101 Polyester PTFE Filler
| Physical Properties | Thermal Properties | ||
|---|---|---|---|
| Appearance | Tan - Brown Powder | Thermal Stability from RT to 750°F in air with 1 hour hold at 750°F. | Weight Loss per Hour 3.5% maximum |
| Form | Highly Crystalline | ||
| Particle Size | Screen Analysis: | ||
| +170 5% max | |||
| +230 20% max | |||
| +325 50-80% | |||
| Average Particle Size | 60 to 75 microns (0.007 - 0.015 mm) | Decomposition Temperature | Above 800°F (426.7° C) |
| Apparent Density | 39.95 lb/ft3 (0.64g/cm3) | Maximum Recommended | Intermittent 600-700°F (316-371°C) |
| Service Temperature | Continuous 500-600°F (260-316°C) | ||
Ekonol® M102A Polyester PTFE Filler for Seal Applications
Ekonol M102A aromatic polyester filler is a light tan/white powder additive that, when combined with PTFE, produces composite materials with excellent temperature and wear resistance for a wide range of mating surfaces in demanding services.
Saint-Gobain M102A is a polyester powder comprised of smaller particle sizes that are ideal for thinner products such as seals. When added to PTFE, Ekonol M102A filler imparts maximum dimensional, chemical & thermal stability. In addition, the non-abrasive character of Ekonol M102A filler enhances the frictional performance to prevent galling of softer mating surfaces better than other PTFE filler.
Typical Properties of Ekonol® T101 Polyester PTFE Filler
| Physical Properties | Thermal Properties | ||
|---|---|---|---|
| Appearance | Tan - Brown Powder | Thermal Stability from RT to 750°F (399°) in air with 1 hour hold at 750°F (399°). | Weight Loss per Hour 3.5% maximum |
| Form | Highly Crystalline | ||
| Particle Size | Screen Analysis: | ||
| +400 5% max | |||
| -400 80-100% max | |||
| Average Particle Size | 60 to 75 microns (0.007 - 0.015 mm) | Decomposition Temperature | Above 800°F (426.7° C) |
| Apparent Density | 39.95 lb/ft3 (0.64g/cm3) | Maximum Recommended | Intermittent 600-700°F (316-371°C) |
| Service Temperature | Continuous 500-600°F (260-316°C) | ||
|
Relative Wear vs. % Ekonol® Filler in PTFE (CS) |
Frictional Properties of 25% Ekonol® Filler / PTFE in Various Environments (CS) |
|
Coefficient of Friction vs. % Ekonol® Filler in PTFE (CS) |
K Factors for 25% Ekonol® Filler / PTFE Running Against Various Metal Surfaces (CS) |
|
Effect of Temperature on Wear Properties - Ekonol® Fillers for PTFE (CS) |
Ekonol® PTFE Fillers -- Typical Electrical Properties (CS) |
|
Limiting PV for 25% Ekonol® Filler / PTFE (CS) |
Ekonol® PTFE Fillers -- Typical Properties (CS) |
|
Wear Rate for 25% Ekonol® Filler / PTFE and Polyimide-Filled PTFE (CS) |
Ekonol® PTFE Fillers -- Typical Chemical Resistance Properties (CS) |