Saint-Gobain Coating Solutions created the ceramic-based thermal spray Flexicord products to increase the life of components exposed to demanding process conditions. Ceramic Flexicord products are available in a range of coating formulations to cover a wide range of applications including resistance to mechanical wear, corrosion, thermal insulation, electrical insulation, diffusion barrier.
Combined with Master Jet®, Master Jet® Auto, or ID Gun, these Flexicord of Ceramic Series represent the best user-friendly solution for best-in-class ceramic coatings.
Corrosion resistant in most acid & alkaline environments, and suitable for high-temperature applications.
Hardness: 700 - 770 Hv300
Density: 3.6 g/cm3 (0.13 lb/in3)
Good absorption and diffusion of infrared rays (IR), moderate corrosion resistance in acidic & alkaline environments.
Hardness: 900 - 1000 HV100
Density: 3.6 g/cm3 (0.13 lb/in3)
Good absorption & diffusion of infrared rays with moderate corrosion resistance in acidic & alkaline environments.
Hardness: 900 - 1000 HV100
Density: 3.6 g/cm3 (0.13 lb/in3)
Black body ceramic coating for solar absorbers. Coating can be easily applied on site.
Hardness: 710 - 920 HV300
Density: 3.9 g/cm3 (0.13 lb/in3)
Good corrosion resistance in acidic & alkaline environments with moderate abrasion resistance.
Hardness: 800 Hv300
Density: 3.5 g/cm3 (0.126lb/in3)
Excellent sliding wear resistance and excellent smooth finish after grinding.
Hardness: 1010 HV200
Density: 3.6 g/cm3 (0.13lb/in3)
Excellent sliding wear resistance with excellent smooth finish after grinding.
Hardness: 950 HV200
Density: 3.6 g/cm3 (0.13lb/in3)
Suitable for contact with molten metals and ideal thermal barrier coating for crucibles, chutes & fusion pots.
Hardness: 730 HV300
Density: 3 g/cm3 (0.10lb/in3)
CTE of magnesium zirconate is close to the CTE of steel, provides protection against contact for molten steel for a short time.
Hardness: 760 HV300
Density: 4.9 g/cm3 (0.17 lb/in3)
Used as bond coat when Nickel formulations aren't suitable, and low AC dielectric strength - KV/mm.
Hardness: 950 HV300
Density: 4.1 g/cm3 (0.15 lb/in3)